Home Products Guide Gallery Stockists Contact Colours FAQ
Transparent, waterborne, protective coating for timber. Quick drying, low odour, satin finish, non-yellowing.

: Suitable for most types of timber, as a stand alone 3 coat system on interior woodwork. Also commonly used as the finishing coats on timber that has been stained with Cetol HLSe.

Application: Stir well. Apply to clean, dry, sound substrate. Brush application recommended; apply at 50 microns wet. Light cut back between coats. (click here for application guide)

Available Sizes: 1L, 2.5L
Number of coats Practical coverage
in m2/litre
Min. film thickness
required per coat
Thinning % Application
Drying time
2-3 coats 15-20m2 dressed timber. Wet
50 microns
Thin maximum 5%
first coat with water
5hrs at 20/65% relative
humidity (coating must be
dry before re-coating)
15 microns
Brush clean up

© 2013 Jac Jay Limited, PO Box 12 161, Penrose, Auckland Ph 09 571 0023 Fax 09 571 0022
Office & Showroom, 25 Walls Rd, Penrose. 0800 SIKKENS (745 536)